AWood AR60x40 Wood
7 sold in last 24 hours
General process for installing plastic wooden slats AWood. Note that this procedure is a general guide, and you should follow the manufacturer's specific instructions AWood and seek expert advice:
Hotline: 0913 8888 23
- Preparation:
- Check installation parts and materials, including AWood plastic wood slats, accessories such as screws, nails, bolts, screws, and necessary tools.
- Determine structure and installation layout, and ensure technical requirements.
- Design adhered to
- Surface preparation, support frame and assistant:
- Make sure the installation surface is flat, clean and dry.
- Build a solid support frame for the plastic wooden slats, ensuring appropriate separation and strength (frame distance ≤ 1200mm)
- Installing plastic wooden slats:
- Place the AWood plastic wooden slats on the support frame according to the determined layout.
- Use the mounting method recommended by the manufacturer, including using stainless screws, nails or other accessories.
- Ensure that the plastic wood slats are attached firmly and comply with the distances and technical requirements.
- Cut and merge:
- If necessary, cut the plastic wood slats to the desired size and shape using the appropriate cutting tool.
- Fold plastic wood slat pieces together if necessary, using recommended attachment methods and ensuring aesthetics and sturdiness.
- Check and finalize:
- Inspect the entire installation process, ensuring its accuracy and meeting technical and design requirements.
- Clean the surface and remove any dirt or dust from the installation process.
- Recheck attachment and connections, ensuring firmness and safety.
- Handover and signing to confirm construction warranty completion date.
Note: that installing AWood may require specific techniques and methods depending on project requirements. Therefore, always refer to the specific installation instructions from the hotline and follow the instructions of experts if necessary.
Advice: take part in training courses and become proficient in direct combat construction to become an expert before constructing plastic wood AWood
When using outdoor plastic wood AWood, here are some important notes that you should consider:
- Make sure the installation surface is flat, clean and dry. Remove any dirt, grease, or other obstructing materials from the surface before installation
-
Follow installation instructions: Carefully read the manufacturer's installation instructions AWood and follow recommended procedures and regulations. This ensures that the laminate is installed properly and ensures its longevity and performance. ensures that the laminate is installed properly
-
Thermal insulation and ventilation: For outdoor plastic wood installations, make sure toprovide adequate space between the plastic wood surface and the surface below. This improves ventilation and prevents water accumulation under the surface of the plastic wood.
-
Mounting Techniques: Use proper mounting techniques to ensure the plastic wood is attached firmly and stable. This includes using stainless screws, nails or other mounting methods recommended by the manufacturer AWood. ensures the plastic wood is attached firmly sturdy and stable.
-
Do not use harsh tools: Avoid using tools with high bending strength or excessive force when installing plastic wood. This may cause damage or loss of the aestheticsof the product.
- Requires screwing in a vertical and perpendicular position of 900 and leaving an expansion gap of 3mm - 5mm at each end
- Connected to the stainless steel frame inside by electric welding or connecting bowls, you must pre-drill before screwing onto the wooden bar AWood
-
Weekly maintenance and cleaning: To keep plastic wood outdoors AWood to maintain the best appearance and longevity, do this Regular maintenance every 6 months. Clean plastic wood surfaces by wiping with warm water and mild soap. Limit the use of strong detergents or vigorous scrubbing on the surface.
Note that these notes are general guidelines only. To ensure that the installation and maintenance of outdoor plastic wood AWood achieves the best effectiveness, please refer to specific instructions from the manufacturer and consult experts at hotline: 0913 8888 23
| Advantages | easy to clean or Weatherproof (Sun & Rain resistant) or outdoor application or washable. Surface grain matches authentic wood or available in multiple colors |
| Floor Type | Wood Plastic Composite (WPC) outdoor |
| Warranty | 5 Years |
| Wood Color | Wood |
| Country of Origin | Manufactured in Vietnam using Japanese technology |
| Thickness | 40 mm |
| Specifications | (L x W x H): 3600 mm x 60 mm x 40 mm |
| Outdoor | decorative fluted louvers |