UltraWood PS152x9 Acacia
12 sold in last 24 hours
Specialized in wall and ceiling cladding for interior and outdoor decoration.
UA PS Series (Ultrashield Layer AWood, Polystyrene) is a new product produced by dual extrusion technology: it simultaneously extrudes two WPC core materials and an HDPE coating to form a solid body,
Core is identical to synthetic resin wood Polystyrene fully covered with HDPE hard plastic compound created by AWood® with an ultra-protective outer layer (Ultrashield Layer).
UA PS with mixed HDPE outer layer Mix multiple colors on the board surface to create a wood-like and colorful finish, and the inner layer can achieve the requirements for physical properties and more applications.
Many line advantages UA PS above all: UV resistant to fading dirty dirty.
| PS152x9 | Design | Brand | AWood® |
| Appearance | Solid plate, long bar | Mantle | Colorfast, stain-resistant, stable and balanced |
| Size | 152x9 mm | Color | Applewood color |
| Length | 4.9m | Surface | wood grain embossed |
| Settings | nail and screw insertion, installed on bone | Functions | Anti-slip, waterproof, UV resistant, |
| Packaging | bundle of 10 Bars | Application | Outdoor, interior decoration, Wall and ceiling cladding |
| Warranty | 15 years, longest color warranty period | Material | 95% PS plastic, 5% additive |
| M2 | 6.76 m long | Inventory | Tp.hcm |
The outstanding advantage is that the surface is 100% stain-resistant, cleaning only requires water and soap powder.
General process for installing plastic wood panels UltraWood. Note that this procedure is a general guide, and you should follow the manufacturer's specific instructions UltraWood and seek expert advice:
Hotline: 0913 8888 23
- Preparation:
- Check installation parts and materials, including plastic wood panels UltraWood, accessories such as screws, nails, bolts, fasteners, and necessary tools.
- Determine structure and installation layout, and ensure technical requirements
- Design adhered to
- Surface preparation, support frame and assistant:
- Make sure the installation surface is flat, clean and dry.
- Build a solid support frame for the plastic wood paneling, ensuring appropriate separation and bearing capacity (frame distance ≤ 300mm)
- Installation of plastic wood panels:
- Place the plastic wood panel UltraWood on the support frame according to the determined layout.
- Use the mounting method recommended by the manufacturer, including using stainless screws, nails or other accessories.
- Ensure that the plastic wood cladding is attached firmly and complies with the distances and technical requirements.
- Cut and merge:
- If necessary, cut the plastic wood panel to the desired size and shape using the appropriate cutting tool.
- Join plastic wood panels together if necessary, using recommended attachment methods and ensuring aesthetics and sturdiness.
- Check and finalize:
- Inspect the entire installation process, ensuring its accuracy and meeting technical and design requirements.
- Clean the surface and remove any dirt or dust from the installation process.
- Recheck attachment and connections, ensuring firmness and safety.
- Handover and signing to confirm construction warranty completion date.
Note: that installing UltraWood may require specific techniques and methods depending on project requirements. Therefore, always refer to the specific installation instructions from the hotline and follow the instructions of experts if necessary.
Advice: take part in training courses and become proficient in on-the-job construction to become an expert before constructing AWood plastic wood
When constructing plastic wood outdoors UltraWood, here are some important notes that you should consider:
- Make sure the installation surface is flat, clean and dry. Remove any dirt, grease, or other obstructing materials from the surface before installation
- Follow installation instructions: Carefully read the manufacturer's installation instructions UltraWood and follow recommended procedures and regulations. This ensures that the laminate is installed properly and ensures its longevity and performance. Make sure that the plastic wood is installed properly
- Thermal insulation and ventilation: For outdoor laminate installations, be sure to provide adequate space between the laminate surface and the surface below. This improves ventilation and prevents water accumulation under the surface of the plastic wood.
- Mounting techniques: Use proper mounting techniques to ensure the plastic wood is firmly and stably attached. This includes the use of stainless screws, nails or other mounting methods recommended by the manufacturer. Make sure the plastic wood is firmly and stably attached.
- Do not use aggressive tools: Avoid using tools with bending strength or excessive force handling when installing plastic wood. This may cause damage or loss of the product's aesthetics.
- Requires screwing in a vertical and perpendicular position 900 and leaving an expansion gap of 3mm - 5mm at each end
- Connected to the stainless steel frame inside by electric welding or connecting bowls, you must pre-drill before screwing onto the wooden bar UltraWood
- Weekly maintenance and cleaning: To maintain the best appearance and longevity of outdoor plastic wood UltraWood, perform regular maintenance every 6 months. Clean plastic wood surfaces by wiping with warm water and mild soap. Limit the use of strong detergents or vigorous scrubbing on the surface.
Note that these notes are general guidelines only. To ensure the best installation and maintenance of outdoor UltraWood , please refer to specific instructions from manufacturer and expert consultant number hotline: 0913 8888 23
| Wood Color | Rose Teak or Snow Pine |
| Advantages | easy to clean or Weatherproof (Sun & Rain resistant) or outdoor application or washable. Surface grain matches authentic wood or available in multiple colors |
| Specifications | 4900 mm x 152 mm x 9 mm or (L x W x H) : 4900 mm x 152 mm x 9 mm |
| Outdoor | flooring / decking or decorative panel cladding |
| Floor Type | Wood Plastic Composite (WPC) outdoor |
| Warranty | 5 Years |
| Thickness | 9 mm |