Ultra Wood UA142x22 Red Sandalwood

Ultra A Wood UA142x22 Sandalwood

UA WPC Series (Ultrashield Layer AWood, wood plastic composite) is a new product produced by dual extrusion technology: pressed at the same time extrusion of two WPC core materials and HDPE coating to form a solid body,

The core is identical to WPC synthetic wood and is completely covered by HDPE hard plastic compound, creating AWood with an ultra-protective outer layer
(Ultrashield Layer)

AU WPC with HDPE outer layer mixes many colors on the board surface to create a wood-like and colorful finish, and the inner layer can achieve the requirements for physical properties and more application functions

Many advantages of the AU WPC line, above all:UV resistant to fading and not semi-dirty

The outstanding advantage is that the surface is 100% stain-resistant, cleaning only requires water and soap powder

General process for installing outdoor wooden floors UltrAwood. Note that this procedure is a general guide, and you should follow the manufacturer's specific instructions. expert advice:

Hotline: 0913 8888 23

1. Preparation:

• Inspect components and installation materials, including wooden floors UltrAwood, accessories such as screws, nails, bolts, screws, and necessary tools.
• Determine structure and installation layout, and ensure technical requirements

2. Design adhered to

• Surface preparation, support frame and assistant:
• Make sure the installation surface is flat, clean and dry.
• Build a sturdy support frame for the outdoor wooden floor, ensuring appropriate separation and bearing capacity (frame distance ≤ 300mm)

3. Installation of outdoor wooden floors:

• Laying outdoor wooden flooring UltrAwood on the supporting beam frame according to defined layout.
• Use the mounting method recommended by the manufacturer, including using connecting pins, stainless screws, nails or other accessories.
• Ensure that the outdoor plastic wood flooring is attached firmly and complies with the distances and technical requirements.

4. Cut and merge:

• If necessary, cut the plastic wood panel to the desired size and shape using the appropriate cutting tool.
• Join plastic wood floor panels together if necessary, using recommended attachment methods and ensuring aesthetics and sturdiness.

5. Check and finalize:

• Inspect the entire installation process, ensuring its accuracy and meeting technical and design requirements.
• Clean the surface and remove any dirt or dust from the installation process.
• Recheck attachment and connections, ensuring firmness and safety. 
• Handover and signing to confirm construction warranty completion date.

Note: that the installation of plastic wood flooring UltrAwood may require specific techniques and methods depending on project requirements. Therefore, always refer to the specific installation instructions from the hotline and follow the instructions of experts if necessary.

Advice: take part in training courses and be proficient in direct combat construction to become an expert before constructing plastic wood UltrAwood

When constructing plastic wood outdoors UltrAwood, below Here are some important notes you should consider:

1. Make sure the installation surface is flat, clean and dry. Remove any dirt, grease, or other obstructing materials from the surface before installation
2. Follow installation instructions: Read the manufacturer's installation instructions carefully UltrAwood and comply with recommended procedures and regulations. This ensures that the laminate is installed properly and ensures its longevity and performance. Make sure that the plastic wood is installed properly
3. Thermal insulation and ventilation: For outdoor laminate installations, be sure to provide adequate space between the laminate surface and the surface below. This improves ventilation and prevents water accumulation under the surface of the plastic wood.
4. Mounting techniques: Use proper mounting techniques to ensure the plastic wood is firmly and stably attached. This includes using stainless screws, nails or other mounting methods recommended by the manufacturer. Make sure the plastic wood is firmly and stably attached.
5. Do not use aggressive tools: Avoid using tools with bending strength or excessive force handling when installing plastic wood. This may cause damage or loss of the product's aesthetics.
6. Requires screwing in a vertical and perpendicular position 90⁰ and leaving an expansion gap of 3mm - 5mm at each end
7. Connected to the stainless steel frame inside by welding or screwing the connection bowl, must pre-drill before screwing onto the wooden bar UltrAwood
8. Weekly maintenance and cleaning: In order for AWood outdoor plastic wood to maintain its best appearance and longevity, perform regular maintenance every 6 months. Clean plastic wood surfaces by wiping with warm water and mild soap. Limit the use of strong detergents or vigorous scrubbing on the surface.

Note that these notes are general guidelines only. To ensure the best installation and maintenance of outdoor plastic UltrAwood , please refer to specific instructions from manufacturer and expert consultant number hotline: 0913 8888 23